Material Safety Data Sheet
|
|
|
Substance and Company Information |
|
|
Product Name |
CASTOR OIL |
|
Supplier |
Soap Basics |
|
Composition/Ingredient Information |
|
|
CAS number |
8001-79-4 |
|
EINECS number |
232-293-8 |
|
Identity/chemical name |
Triglycerides of vegetable origin |
|
Hazardous ingredients |
None |
|
Identification of Hazards |
|
|
Eyes |
May irritate |
|
Skin |
Non irritating, non sensitising |
|
Ingestion |
Edible quality |
|
First Aid Procedures |
|
|
Inhalation |
No vapours present at normal
temperatures |
|
Skin contact |
Wash with soap and water |
|
Eye contact |
Rinse with plenty of water. If
discomfort persists, seek medical attention |
|
Ingestion |
Not considered dangerous |
|
Fire Fighting Measures |
|
|
Suitable extinguishing media |
Water mist, foam, dry powder, CO2 |
|
Unsuitable extinguishing media |
Water jet |
|
Specific hazards, methods or
equipment |
None known |
|
Accidental Release Measures |
|
|
Personal precautions |
Avoid contact with eyes, skin and
clothes. Note that spillages constitute a slipping hazard. |
|
Environmental precautions |
Keep away from drains, surfaces and
ground water. |
|
Methods for cleaning up |
Remove spillage using physical
methods or adsorbents. Clean with hot water and detergents |
|
Handling and Storage |
|
|
Handling |
No specific measures. Normal working
hygiene practices should be employed |
|
Storage |
Liquid oils – store in a cool and
dry place Solid fats – store in a cool and
dry place. If to be stored molten, store at about 10 degrees C above melting
point. |
|
Exposure Controls/Personal
Protection |
|
|
Specific control parameters (e.g.
TLV) |
No known data |
|
Respiratory protection |
No special measures under normal
conditions |
|
Hand protection |
No special measures under normal
conditions |
|
Eye protection |
Wear goggles if there is a risk of
splashing |
|
Skin protection |
No special measures under normal
conditions |
|
Physical and Chemical Properties |
|
|
Appearance |
Pale yellow liquid |
|
Boiling point |
Not known |
|
Cloud point |
Not known |
|
Melting characteristics |
Liquid at ambient temperatures |
|
Flash point |
> 300 degrees C |
|
Auto ignition temperature |
No data |
|
Explosion properties |
Not explosive |
|
Vapour pressure at 200 degrees C |
<0.01 mm Hg |
|
Density at 25 degrees C |
0.90 – 0.92 g/ml |
|
Solubility in water |
Insoluble |
|
pH value |
Insoluble in water |
|
Other information |
See specification / product data
sheet |
|
Stability and Reactivity |
|
|
Stability |
Generally stable, becomes rancid on
exposure to air |
|
Conditions to avoid |
Oxidation promoting conditions
(heat, light) |
|
Material to avoid |
Oxidising materials |
|
Hazardous decomposition products |
None (thermal decomposition
products are H2O and CO2). |
|
Toxicological Information |
|
|
LD/LC50 value |
Not tested on animals |
|
Sensitisation |
No known data |
|
Local effects |
No known data |
|
Short and long term toxicity |
No known data |
|
Human exposure tests |
No known data |
|
Ecological Information |
|
|
Persistence and degradability |
Readily biodegradable |
|
Bio-accumulative potential |
No known data |
|
COD/BOD5 value |
No known data |
|
Content of heavy metals and
substances classed as dangerous to the environment |
None |
|
Disposal Considerations |
|
|
Waste materials |
Disposal according to local
authority advice. May be burned together with household waste if this is
accepted by The Authorities. Very large quantities will require specialist
disposal. |
|
Contaminated packaging |
Disposal according to local
authority advice. |
|
Transport Information |
|
|
Land transport |
Not classified |
|
Sea transport |
Not classified |
|
Air transport |
Not classified |
|
Further information |
Not a hazardous product |
|
Regulatory Information |
|
|
Classification according to EU
directives |
Not a dangerous material |
|
Symbols and phrases according to
health hazards |
None |
|
Dangerous substances to label |
None |
Other Information
The information in this material
safety data sheet is accurate to the best of our knowledge and is valid for
the material as delivered. This information only describes safety measures
and no liability arising out of the use, application or processing of the
material described herein is accepted. It is the users responsibility to
determine safe conditions for the use of this product. |
|