Material Safety Data Sheet
|
|
|
Substance
and Company Information |
|
|
Product
Name |
JOJOBA OIL |
|
Supplier |
Soap
Basics |
|
Composition/Ingredient
Information |
|
|
CAS number |
61789-91-1 |
|
EINECS
number |
273-313-5 |
|
Identity/chemical
name |
Triglycerides
of vegetable origin |
|
Hazardous
ingredients |
None |
|
Identification
of Hazards |
|
|
Eyes |
May
irritate |
|
Skin |
Non
irritating, non sensitising |
|
Ingestion |
Edible
quality |
|
First
Aid Procedures |
|
|
Inhalation |
No vapours
present at normal temperatures |
|
Skin
contact |
Wash with
soap and water |
|
Eye
contact |
Rinse with
plenty of water. If discomfort persists, seek medical attention |
|
Ingestion |
Not
considered dangerous |
|
Fire
Fighting Measures |
|
|
Suitable
extinguishing media |
Water
mist, foam, dry powder, CO2 |
|
Unsuitable
extinguishing media |
Water jet |
|
Specific
hazards, methods or equipment |
None known |
|
Accidental
Release Measures |
|
|
Personal
precautions |
Avoid
contact with eyes, skin and clothes. Note that spillages constitute a
slipping hazard. |
|
Environmental
precautions |
Keep away
from drains, surfaces and ground water. |
|
Methods
for cleaning up |
Remove
spillage using physical methods or adsorbents. Clean with hot water and
detergents |
|
Handling
and Storage |
|
|
Handling |
No
specific measures. Normal working hygiene practices should be employed |
|
Storage |
Liquid
oils – store in a cool and dry place Solid fats
– store in a cool and dry place. If to be stored molten, store at about 10
degrees C above melting point. |
|
Exposure
Controls/Personal Protection |
|
|
Specific
control parameters (e.g. TLV) |
No known
data |
|
Respiratory
protection |
No special
measures under normal conditions |
|
Hand
protection |
No special
measures under normal conditions |
|
Eye
protection |
Wear
goggles if there is a risk of splashing |
|
Skin
protection |
No special
measures under normal conditions |
|
Physical
and Chemical Properties |
|
|
Appearance |
Golden
yellow liquid |
|
Boiling
point |
Not known |
|
Cloud
point |
Not known |
|
Melting
characteristics |
Liquid at
ambient temperatures |
|
Flash
point |
> 300
degrees C |
|
Auto
ignition temperature |
No data |
|
Explosion
properties |
Not
explosive |
|
Vapour
pressure at 200 degrees C |
<0.01
mm Hg |
|
Density at
25 degrees C |
0.90 –
0.92 g/ml |
|
Solubility
in water |
Insoluble |
|
pH value |
Insoluble
in water |
|
Other
information |
See
specification / product data sheet |
|
Stability
and Reactivity |
|
|
Stability |
Generally
stable, becomes rancid on exposure to air |
|
Conditions
to avoid |
Oxidation
promoting conditions (heat, light) |
|
Material
to avoid |
Oxidising
materials |
|
Hazardous
decomposition products |
None
(thermal decomposition products are H2O and CO2). |
|
Toxicological
Information |
|
|
LD/LC50
value |
Not tested
on animals |
|
Sensitisation |
No known
data |
|
Local
effects |
No known
data |
|
Short and
long term toxicity |
No known
data |
|
Human
exposure tests |
No known
data |
|
Ecological
Information |
|
|
Persistence
and degradability |
Readily
biodegradable |
|
Bio-accumulative
potential |
No known
data |
|
COD/BOD5
value |
No known
data |
|
Content of
heavy metals and substances classed as dangerous to the environment |
None |
Disposal Considerations
|
|
|
Waste
materials |
Disposal
according to local authority advice. May be burned together with household
waste if this is accepted by The Authorities. Very large quantities will
require specialist disposal. |
|
Contaminated
packaging |
Disposal
according to local authority advice. |
|
Transport
Information |
|
|
Land
transport |
Not
classified |
|
Sea
transport |
Not
classified |
|
Air
transport |
Not
classified |
|
Further
information |
Not a
hazardous product |
|
Regulatory
Information |
|
|
Classification
according to EU directives |
Not a
dangerous material |
|
Symbols
and phrases according to health hazards |
None |
|
Dangerous
substances to label |
None |
Other Information
The
information in this material safety data sheet is accurate to the best of our
knowledge and is valid for the material as delivered. This information only
describes safety measures and no liability arising out of the use,
application or processing of the material described herein is accepted. It is
the users responsibility to determine safe conditions for the use of this
product. |
|